Comparison of Wettability for Ocular Prosthesis Depending on Different Kinds of Artificial Tear Eye Drops
인공눈물 점안제 종류에 따른 의안 표면 습윤능 비교
장, 세란; 윤, 일석; 임, 헌섭; 국, 경훈
Journal of the Korean ophthalmological society, 55(12):1745-1751, 2014
Journal of the Korean ophthalmological society; 대한안과학회지
Purpose: In this study we compared the surface wettability of ocular prosthesis and depositions depending on different types of artificial tear eye drops.
Methods: The artificial tear eye drops contain sodium hyaluronate (HA) 0.1%, 0.18%, 0.3%, carboxylmethylcellulose sodium (CMC), hydroxymethylcelluose + dextran (HMC), propylene glycol + polyethylene glycol (PG), polysorbate 80 (PS) povidone (Pov) were evaluated. Flat rectangular parallelepiped blocks consisting of polymethylmethacrylate (PMMA) or silicone materials were made. One artificial tear eye drop was applied on the surface of two different blocks of artificial eyes using a 23-gauge needle. Then, the static method contact angle was measured by using a contact angle goniometer. To measure the deposits, a petri dish was covered with 3 mL of artificial tear eye drops and dried for 48 hours at room temperature. Then, the light transmittance at the center of the petri dish was measured to investigate the amount of the residue.
Results: The contact angles of HA 0.1%, 0.18%, 0.3%, CMC, HMC, PG, PS and Pov on PMMA were 78.69°, 84.29°, 75.46°, 80.93°, 66.29°, 71.26°, 58.40° and 70.24°, respectively. The contact angles on silicone were 53.68°, 60.87°, 64.46°, 62.78°, 38.89°, 63.58°, 30.68° and 51.41°, respectively. The largest decrease in transparency was observed in the artificial tear eye drops containing HMC.
Conclusions: The wettability and deposits on the surface of ocular prosthesis can vary based on the components and concentration of artificial tear eye drops. The results from this study should be considered when choosing the right artificial tear eye drops for improving dry eye symptoms in patients wearing ocular prostheses.
목적: 인공눈물 점안제의 종류에 따른 의안 표면에서의 습윤능 및 잔류물 정도의 차이를 확인하고자 하였다.
대상과 방법: 시중에 시판되는 인공눈물 점안제 중, Sodiumhyaluronate (HA) 0.1%, 0.18%, 0.3%, Carboxylmethylcellulose sodium (CMC), Hydroxymethylcelluose+Dextran (HMC), Propylene glycol+Polyethylene glycol (PG), Polysorbate 80 (PS), Povidone (Pov) 성분의 점안제를 연구 대상으로 선정하여, 폴리메틸메타크릴레이트(Polymethylmethacrylate, PMMA)재질과 실리콘재질의 블록 표면 에 각각 한 방울씩 떨어뜨린 후 접촉각을 측정하였다. 잔류물 측정은 투명한 페트리 접시에 점안제를 도포하고 상온에서 건조시킨 후 빛 투과율을 측정하였다.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.
Total Visit :5,786,429
Total Download :2,415,082
Today View :1,103
Ajou University Medical Information & Media Center 164 Worldcup-ro Yeongtong-gu Suwon 16499 Korea / TEL : 031-219-5312 / FAX : 031-219-5314 Copyright (c) Ajou University Medical Information & Media Center All Rights Reserved. AJOU Open Repository는 국립중앙도서관 OAK 보급사업으로 구축되었습니다.